What is Flipper Zero
Your cyber buddy
Flipper Zero is completely autonomous and can be controlled from a 5-Position directional pad without additional devices, such as computers or smartphones. Common scripts and functions are available from the menu.
For more control, you can connect to Flipper via USB. Instead of a TFT/IPS/OLED, we decided to build in a cool old-school LCD screen, which is perfectly visible in sunlight and has an ultra-low power consumption of 400nA with the backlight turned off.
Sub-1 GHz Transceiver
Sub-1 GHz Range
This is the operating range for a wide class of wireless devices and access control systems, such as garage door remotes, boom barriers, IoT sensors and remote keyless systems.
Flipper has an integrated 433MHz antenna, and a CC1101 chip, which makes it a powerful transceiver capable of up to 50 meters range.
Customizable radio platform
CC1101 is a universal transceiver designed for very low-power wireless applications. It supports various types of digital modulations such as 2-FSK, 4-FSK, GFSK and MSK, as well as OOK and flexible ASK shaping. You can perform any digital communication in your applications such as connecting to IoT devices and access control systems.
Oh, and one more thing — Flipper uses 433 MHz to communicate with other Flippers out there, so you can make some cyber-dolphin friends ?
Low-frequency proximity cards
You can also emulate cards by entering their IDs manually.
Moreover, Flipper owners can exchange card IDs remotely.
High-frequency proximity cards
It works pretty much the same as the 125 kHz module, allowing you to interact with NFC-enabled devices — read, write and emulate HF tags.
Bluetooth Connect to apps
Full BLE support allows Flipper Zero to act as both a host and a peripheral device, allowing you to connect your Flipper to 3rd-party devices and a smartphone simultaneously.
Our mobile developers are designing official iOS and Android apps to let you unleash Flipper’s potential with a larger screen and greater control.
The infrared transmitter can transmit signals to control electronics such as TVs, air conditioners, stereo systems and more.
Flipper has a built-in library of common TV vendor command sequences for power and volume control. This library is constantly updated by Flipper community users uploading new signals to Flipper’s IR Remote database.
Infrared learning feature
Flipper Zero also has an IR receiver that can receive signals and save them to the library, so you can store any of your existing remotes to transmit commands later, and upload to the public IR Remote database to share with other Flipper users.
External storage for apps and data
There is lots of heavy data Flipper has to store: remotes codes, signal databases, dictionaries, image assets, logs and more. All this data can be stored on an SD card, as well as user plugins.
The SD slot will have a push-push type connector, so the card will be reliably secured inside and won’t stick out.
Flipper Zero will support any FAT32 formatted microSD card to store your assets so you’ll never have to worry the memory will run out. The card is not required for Flipper Zero to operate and is not included.
Tool for Hardware Exploration
1-Wire keys (Touch Memory)
Flipper Zero has a built-in 1-Wire connector to read iButton (aka DS1990A, Touch Memory or Dallas key) contact keys. This old technology is still widely used around the world. It uses the 1-Wire protocol that doesn’t have any authentication. Flipper can easily read these keys, store IDs to the memory, write IDs to blank keys and emulate the key itself.
Flipper Zero has a unique contact pad design on the corner — its shape works as a reader and a probe to connect to iButton sockets at the same time. This mode is also handy for silently intercepting the 1-Wire data line.
MCU (Microcontroller unit)
ARM Cortex-M4 32-bit 64 MHz (application processor)
ARM Cortex-M0+ 32 MHz (network processor)
Flash: 1024 KB
SRAM: 256 KB
Resolution: 128×64 px
Diagonal Size: 1.4“
LiPo 2000 mA⋅h
7 days approximately
Sub-1 GHz module
Chip: TI CC1101
TX Power: 0 dBm max
Frequency bands (depends on your region):
● 315 MHz
● 433 MHz
● 868 MHz
● 915 MHz
Frequency: 13.56 MHz
● One well-known brand
● NFC Forum protocols
RFID 125 kHz
Frequency: 125 kHz
Modulation: AM, PSK, FSK
● EM400x, EM410x, EM420x
● HIDProx, Indala
3.3 CMOS Level
Input 5V tolerant
Up to 20 mA per digital pin
Bluetooth LE 5.0
TX Power: 0 dBm max
RX Sensitivity: -96 dBm
Data rate: 2 Mbps
Up to 64GB MicroSDHC
Read/Write speed: up to 5 Mbit/s
Frequency: 100-2500 Hz
Sound Output: 87 dB
Force value: 30 N
Speed: 13500 rpm
TX/RX range: 800-950 nm
TX power: 300 mW
Operate modes: Reader/Writer/Emulator
● Dallas DS1990A
Reboot — Back+Left buttons for 2 seconds
1x USB 2.0 port, type C
Size: 100 x 40 x 25 mm
Weight: 102 grams
Body materials: PC, ABS, PMMA
Operating temperature: 0 ~ 40 °C